Launch offer: $20 off your order with code

L5M9 Practice questions

Operations Management

0/5 checked

free questions
5
with answers
in the full set
120
question types
2

Updated

  1. Question 1

    Single answer

    What is the end purpose of introducing a Total Quality Management process to the operations department of an organisation?

    Choose one answer
    Show answer

    Correct answer

    • A

      customer satisfaction

    Explanation

    Total Quality Management places customer-defined quality at the centre of management decisions. Customer needs inform design, purchasing, production, service delivery and the treatment of complaints. Managers must monitor satisfaction as well as internal defect rates, because technically compliant output can still disappoint buyers. Lower costs, fewer defects and greater market share are possible consequences of delivering consistent value; they are not substitutes for understanding and satisfying customers. A successful quality programme coordinates design, suppliers, operations and customer feedback. Preventing defects generally provides greater value than discovering them after production, although verification remains essential. Improvement must therefore link preventive controls, capable employees and meaningful measures of customer-defined quality. The appropriate selection is customer satisfaction. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. Management commitment and employee competence are necessary to translate the quality approach into stable everyday operating practices. The wider management implication is to define the requirement precisely, monitor the relevant outcome and act on deviations before they become established operating problems.

    Study Guide CIPS L5M9 – Evaluate the role of total quality management in operations management; the uploaded question bank cites study-guide page(s) 105.

  2. Question 2

    Multiple answer

    How can a company measure the dependability of an item it produces? Select TWO

    Choose 2 answers
    Show answer

    Correct answer

    • A

      number of injuries caused by the product

    • E

      documentation is accurate

    Explanation

    Dependability encompasses reliable functioning over time, availability and, in safety-related applications, freedom from unacceptable harm. Injury counts can indicate safety problems, while accurate product instructions help users operate and maintain goods properly. Neither indicator alone quantifies reliability: a sound assessment also examines failure rates, mean time between failures and warranty returns. Complaint response time measures service speed; choice of colours relates to flexibility; gross margin is financial. Effective application requires a clear baseline and a mechanism for testing whether action improved performance. Managers should distinguish leading indicators from final outcomes and avoid drawing causal conclusions from simple association. The strongest tools connect evidence, decisions and sustained operational controls. The required selections are number of injuries caused by the product and documentation is accurate. These choices address the particular category named in the question, whereas the remaining alternatives describe other activities, dimensions or outcomes. Consistent measurement and periodic review are necessary to distinguish a sustained improvement from a temporary or misleading change.

    Study Guide CIPS L5M9 – Analyse tools for improving performance in operations management; the uploaded question bank cites study-guide page(s) 76.

  3. Question 3

    Single answer

    Terrance is an Operations Director at a pharmaceutical company which produces vaccines. He has been made aware of a malfunctioning piece of equipment with a Mean Time between Failures rating of 2 days. What characteristic of the machinery is being measured?

    Choose one answer
    Show answer

    Correct answer

    • B

      reliability

    Explanation

    Mean Time Between Failures measures average operational time between failures of repairable assets. It is a reliability metric rather than a cost or durability measure. If machinery runs for 240 hours and fails five times, the observed MTBF is 48 hours, or two days of continuous operation. This is an average, not a prediction that failure will occur precisely every second day. Availability additionally depends on how quickly the machine is restored after a failure. Where consequences are significant, managers should prioritise preventive controls, reliable monitoring and prompt restoration. Performance measures such as downtime, MTBF, repair time and availability help identify weaknesses. The chosen technique must also account for costs, safety and the possibility of common-cause failures. The appropriate selection is reliability. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. Documented responsibilities, suitable spare capacity and tested recovery arrangements can reduce the duration and consequences of disruption.

    Study Guide CIPS L5M9 – Explain techniques in failure prevention and recovery that can be applied in operations management; the uploaded question bank cites study-guide page(s) 94.

  4. Getting the hang of it? 115 more L5M9 questions to go, each with its answer. Unlock them all

  5. Question 4

    Single answer

    At which point in the manufacturing process would Failure Mode and Effects Analysis (FMEA) be first used?

    Choose one answer
    Show answer

    Correct answer

    • A

      before manufacturing begins

    Explanation

    Failure Mode and Effects Analysis is most valuable while product and process decisions remain open to change. Design FMEA examines design weaknesses; Process FMEA examines potential manufacturing mistakes and control failures. Analysts identify failure modes, effects, causes and safeguards, then prioritise actions using severity, occurrence and detection or a modern action-priority scheme. FMEA should be updated after process modifications and field failures, but its preventive value is highest before mass production commits resources to an unsuitable design. Reliable operations depend on designing out avoidable faults and responding systematically when failures occur. Teams should capture defect and incident evidence, identify root causes and test corrective actions. A response that merely restores service without addressing repeat failure may increase long-term operating costs. The appropriate selection is before manufacturing begins. This follows from the distinction between the concept described and the alternative activities or measures in the answer choices. Documented responsibilities, suitable spare capacity and tested recovery arrangements can reduce the duration and consequences of disruption.

    Study Guide CIPS L5M9 – Explain techniques in failure prevention and recovery that can be applied in operations management; the uploaded question bank cites study-guide page(s) 97.

  6. Question 5

    Multiple answer

    When conducting Failure Mode and Effects Analysis (FMEA), which systems could be used to communicate or assess risks to business operations? Select TWO.

    Choose 2 answers
    Show answer

    Correct answer

    • C

      Red-Amber-Green (RAG) system

    • D

      A numerical scale from 1 to 10

    Explanation

    Traditional FMEA can score severity, occurrence and detection on numerical scales, often from one to ten, and combine these into a risk priority number. A red–amber–green summary may be used internally to communicate priorities to managers, provided thresholds are defined and do not displace analysis of severe risks. ABC analysis is primarily an inventory classification technique. Generic colour coding overlaps with RAG but does not itself specify a consistent risk-assessment method. A comprehensive failure-prevention programme considers the probability of failure, the consequences of interruption and the effectiveness of detection and recovery arrangements. Controls should be proportionate to asset criticality and reviewed using failure records, maintenance information and operational experience. The required selections are red-amber-green (rag) system and a numerical scale from 1 to 10. These choices address the particular category named in the question, whereas the remaining alternatives describe other activities, dimensions or outcomes. Documented responsibilities, suitable spare capacity and tested recovery arrangements can reduce the duration and consequences of disruption.

    Study Guide CIPS L5M9 – Explain techniques in failure prevention and recovery that can be applied in operations management; the uploaded question bank cites study-guide page(s) 99.

  7. Question 6 Locked Unlock to see this question
  8. Question 7 Locked Unlock to see this question

115 questions locked

Unlock all 120 L5M9 questions

You’ve had 5 for free. The other 115 work just like them: pick an answer, then check it.

Questions
120, each with its answer
Explanations
100% of questions explained
Formats
Single answer, Multiple answer
Version
6.0
Access
3 months from purchase

One-time payment

$49.00

Secure checkout